Nasa Marine Clipper Tactical Wireless Wind System Masthead Unit and Display
The Clipper Tactical wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Tactical Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel's 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Tactical Wind display or any other compatible NMEA display unit.
The Clipper Tactical Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication.
Wireless wind speed and direction data to any compatible NMEA display
Easy installation with mast in place ~ no wires to run down
Simple masthead alignment through base unit
Light mast unit weight ~ 190 grams
TECHNICAL SPECIFICATION
Sleep time more than 15,000 Hours
Operating time more than 2,000 Hours
Charging time less than 150 Hours of bright daylight
Fully charged with no further daylight
INTERFACE UNIT
Supply voltage Nominal 12v DC
Supply current 17mA
Wind speed and direction NMEA data sentence MWV to any compatible NMEA device
Tactical wind display unit
The Clipper Tactical Wind Display shows apparent wind speed and direction and, when connected to a log or GPS, it can also show true wind speed and direction.
Technical Data
Wirelss Mast transmitter
NMEA 0183 4800 Baud data sentence MWV ~ update rate = 10 per second
Wind speed 0 to 99.9 Kts
Wind direction 0 to 360 degrees
Supply voltage nominal 12 Volts
Wind sensor supply current 9mA
Display Unit
Supply voltage nominal 12 Volts
Supply current 10mA + 10mA for back light illumination Max
NMEA input sentence MWV
Back light ~ 9 levels
Pointer style ~ 2
Display wind speed ~ 0 to 99 Kts
Display Wind angle ~ 0 to 360 degrees represented by 60 segments
Display case size 110 x 110mm
NMEA boat speed input either VHW from log or RMC from GPS for True wind speed and direction
The Clipper Tactical Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication.
Wireless wind speed and direction data to any compatible NMEA display
Easy installation with mast in place ~ no wires to run down
Simple masthead alignment through base unit
Light mast unit weight ~ 190 grams
TECHNICAL SPECIFICATION
Sleep time more than 15,000 Hours
Operating time more than 2,000 Hours
Charging time less than 150 Hours of bright daylight
Fully charged with no further daylight
INTERFACE UNIT
Supply voltage Nominal 12v DC
Supply current 17mA
Wind speed and direction NMEA data sentence MWV to any compatible NMEA device
Tactical wind display unit
The Clipper Tactical Wind Display shows apparent wind speed and direction and, when connected to a log or GPS, it can also show true wind speed and direction.
Technical Data
Wirelss Mast transmitter
NMEA 0183 4800 Baud data sentence MWV ~ update rate = 10 per second
Wind speed 0 to 99.9 Kts
Wind direction 0 to 360 degrees
Supply voltage nominal 12 Volts
Wind sensor supply current 9mA
Display Unit
Supply voltage nominal 12 Volts
Supply current 10mA + 10mA for back light illumination Max
NMEA input sentence MWV
Back light ~ 9 levels
Pointer style ~ 2
Display wind speed ~ 0 to 99 Kts
Display Wind angle ~ 0 to 360 degrees represented by 60 segments
Display case size 110 x 110mm
NMEA boat speed input either VHW from log or RMC from GPS for True wind speed and direction
Nasa Marine Clipper Tactical Wireless Wind System Masthead Unit and Display
Our price£366.36
RRP£426.00
