Majoni Fender Buoy Brass Inflation Adaptor

Majoni Fender / Buoy Brass Inflation Adaptor.                     
Enables buoys and fenders to be quickly restored to the correct pressure using a suitable pump. The smaller threaded end of the adaptor fits the valve of inflatable Majoni Fenders, the larger, 2 size end of the adaptor fits a range of foot, hand and stirrup pumps.

Instruction on replacing the Majoni valve:
Screw in the inflation adaptor into your fender.
Pull out the valve with the inflation adaptor. Use pliers if you need to
Unscrew the valve and screw in new valve into inflation adaptor
Insert the new valve into your fender with the inflation adaptor, apply pressure on with your plier.
Use the inflation adaptor to reinflate your fender.
How to Inflate your Majoni fenders:
The best way to inflate a fender is just pushing air pressure from a compressor with a flat head against the valve and the fender will inflate. It also is possible to inflate the fender with a bicycle or car pump with the special adaptor. Please do not use a hand set with a pin to inflate, because the pin can damage the valve. Best inflation pressure is 0.2 bar / 2.9 psi. This is the pressure where you should be able to press the body of the fender visible easy with your flat hand.