Jabsco Par-Max 4 Pressure Controlled Pump 12v 25psi Q401J-112S-3A

REF: CLQ401J-112S-3A
Estimated Delivery 3-5 Days
Our price£229.29 RRP£254.77

Jabsco water pressure pump Q401J-112S-3A is an efficient, self-priming Par Max HD4 pump with high flow output for serving four or more outlets. The Jabsco multi-diaphragm design self primes to 2.4m vertical lift and can run dry without damage. Supplied with inline Quick Connect strainer (40 Mesh).

This Jabsco pump replaces the following drinking water pressure pumps: 31620‐0292, 32600‐0092, 82400‐0392, 82500‐0392 and 82600‐0392.

The pressure pump can be used for the following applications: Washdown, with a Y-valve to serve a dual purpose Livewell circulation pump, Freshwater Delivery Pumps (galley, shower, washing machine), Shower Drain, Baitwell, General Purpose and Auxiliary Bilge.

Key Features

Heavy Duty, Coated Motor

Integrated Sealed Pressure Switch

Efficient, quiet operation

Self‐priming

Runs Dry without Damage

Quick Connect Ports

Noise Dampening Baseplate

Thermal Motor Protection (TCO)

Approvals     CE - EMC/EMI, EN 60945 (Marine) EN 61000-6-3 (residential, commercial, & light industrial) EN 55014-1 (Household appliance, electrical tools, & similar products), RCM, WEEE, RoHSII, ISO8846 Marine (Ignition Protected)
Cut Out Pressure Description     25 PSI / 1.7 Bar
Flow Rate Description     15.1 LPM (4 US GPM)
Fuse     15A (Not Included)
Height Description     97mm (3.8")
Length     Pump: 239mm (9.4"), Cable: 305mm (12")
Material     Upper Housing*: Fibre reinforced polypropylene, Lower Housing: Cast Aluminium, Check Valve Retainer*: Polypropylene, Diaphragm*: Santoprene, Check Valves*: EPDM, Switch diaphragm*: EPDM, Bypass Diaphragm*: EPDM, PH Seals*: EPDM, PH Fasteners: Stainless Steel, Baseplate: Plastic & rubber feet, Motor Casing: Cast Aluminium; Coated Steel. (*in contact with water)
Series     Par-Max HD4
Temperature Range     Ambient: 0°C ‐ 60°C (32°F ‐ 140°F), Fluid: 0°C ‐ 60°C (32°F ‐ 140°F)
Voltage Description     12V DC
Width     109mm (4.3")
Brand     Jabsco
Accumulator Recommended     Yes
Warranty     3 Years
Dimensions     Distance between mounting hole centres: 50mm x 90mm (2" x 3.6")
Hose Size     13mm / 1/2"
Maximum Pressure     Inlet: 30 PSI (2.1 Bar)
Model     Q401J-112S-3A
Replaces     Jabsco 31620‐0292, 32600‐0092, 82400‐0392, 82500‐0392 & 82600‐0392, WP-014 & 509736. Closest Alternative for Jabsco 52600-0292 PAR-Max 7 Pump
Self Primes up to     2.4 Metres (7.9 Feet)
Wire Size     2.5mm2 (14 AWG)
Inlet Outlet     Fittings for 13mm (1/2") ID hose
Amps Description     Maximum: 8A (at 25 PSI / 1.7 Bar)