Icom IC-M400BBE Black Box VHF/DSC with HM195G Command Mic and GPS Antenna

The Icom ICM400BBE black box marine radio solution can be installed out of sight, which is important,
where space is at a premium. Controlled by the Icom HM195G Command Mic this allows operation
of all radio functions including DSC, radio, foghorn, hailer horn from the cockpit or fly bridge.

The HM195G Command Mic utilises the same user soft key interface used on Icom’s latest range of
marine radios making control of the radio very straight forward.

Space Saving, Two Piece Configuration
Controlled by HM195G Command Mic
Intuitive User Interface
Active Noise Cancelling Technology
10W Loud Audio, Public Address and Foghorn
Built in Class D DSC
NMEA 0183 Input /Output for Common GPS/NAV Interface
AIS Target Call with MA510TR/MA500TR
IPX7 Waterproof Protection 1.0m depth for 30 minutes
Favourite Channel Function
AquaQuake water draining function for HM195G Command Mic
Dual/tri watch function for monitoring Ch.16 and/or call channel
LCD and keypad backlighting HM195G Command Mic
Meets the latest ITU R M493/14 regulations
Space Saving, Two Piece Configuration

The IC~M400BBE consists of a two piece, black box configuration. The RF unit, M400BBE, can be
installed out of sight and the HM195G Command Mic, provides full function control from up to
18.3m 60ft away from the RF unit.

Intuitive User Interface
The menu system is shared with Icom’s Marine models. The bottom line of the dot matrix display shows
the software key functions which can be toggled with the left and right buttons.
Active Noise Cancelling Technology
The built in bidirectional active noise canceller reduces background noise to up to 90 percent and improves
both your transmitted voice and incoming calls. This could be really essential for you, making you heard when
you really need to, such as when the weather conditions are poor or if engines are running.
10W Loud Audio, Public Address and Foghorn
The IC ~M400BBE has a built in 10W amplifier that increases the audio output from an additional external speaker.
The public address function allows you to make an announcement from the microphone like a loudspeaker, and
the foghorn can also be emitted from the external speaker.
Built in Class D DSC
The M400BBE meets the latest Class D regulation ITUR M493/13 and EN 300 338/3. The built in DSC watch function
monitors Ch. 70 DSC channel activity, even while you are receiving another channel. DSC Distress button on
the back of the HM195G Command Mic. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report*, polling request* and DSC test calls.
*Available upon request!
NMEA 0183 Input /Output for Common GPS/NAV Interface
When connected to an external GPS receiver, current position and time are shown on the Command Mic
display. When receiving position information from another vessel, the radio can transfer it to a navigational
device via NMEA 0183 connectivity.
AIS Target Call with MA510TR/MA500TR
The M400BBE can be integrated with the MA510TR/MA500TR Class B AIS Transponder allowing you to
transmit DSC individual calls to a selected vessel instantly without manual MMSI entry.
IPX7 Waterproof Protection 1.0m depth for 30 minutes
The M400BBE and HM195G Command Mic withstand submersion in up to 1.0m depth of water for 30 minutes.
Favourite Channel Function
The favourite channel function allows you efficient scanning and quick channel selection. Set the favourite channel mark to the channels used most often. When pushing the up/down buttons on the hand microphone, only the tagged channels are selected, while unmarked channels are skipped. Normal and priority scan searches active channels from the favourite channels.
Other Features
Meets the latest ITUR M49314 regulations
AquaQuake water draining function for HM195G Command Mic
Dual/tri watch function for monitoring Ch.16 and/or call channel
LCD and keypad backlighting HM195G Command Mic>!!