IBS Easy Lift Snap Davit Kit for Hypalon Boats Transom Mount Grey

Get on the water quicker with IBS Easy Lift Snap Davits
Suitable for lifting Inflatables and Ribs up to 55KG (110lbs)
The system is simple yet highly effective
Rubber kit for Hypalon boats

A kit comprises of 2 x sprung loaded transom davit fittings s/steel and plastic which
secure to the transom, 2 x Rubber pads with a stainless steel locating hook which
are glued onto the Inflatable using a two pack Hypalon adhesive. Once correctly
positioned the sprung loaded davit fittings lock into the locating hook and
then the tender is ready for lifting

This allows the Inflatable to be lifted into a vertical position 90 degrees

Two pack Hypalon glue which is not supplied is required to bond pads
Manufactured by Ceredi

How to fix or glue inflatable boat PVC fabric patches and accessories to Hypalon fabric RIB collars and tubes (and vice versa)

PVC adhesive and Hypalon fabric (and vice versa) are not compatible but a successful bond can be achieved by:

First, prepare the fabric patch. 
For a PVC fabric patch or handle etc; clean/prime the [to be] glued face of the PVC fabric with MEK solvent (or you can use acetone) and then allow to dry.
 
For a Hypalon fabric patch or synthetic rubber tube handle etc onto a PVC tube or collar, thoroughly abrade the back (the dull/matt/’rubber feel’ side – usually dark grey or black in colour) 
of the Hypalon patch first. Then clean the abraded side with Hypalon Cleaner Solvent or MEK solvent.

Process for attachment.
PVC patch to Hypalon Tube: after cleaning/priming the PVC fabric patch or handle etc, apply a ‘primer coat’ of 1-part PVC adhesive to the glued face of the PVC patch, allow to dry and then simply affix 
the patch to the Hypalon collar or inflatable tube by following the instructions on the 2-Part Hypalon adhesive. 

For Hypalon patch to PVC tube: after abrading and solvent cleaning the back of the Hypalon patch or rubber handle etc, then apply a ‘primer coat’ of 1-part Hypalon adhesive to back of the Hypalon patch. 
Allow to dry and then simply affix to the PVC collar or inflatable boat tube by following the instructions on the 2-part PVC Inflatable Boat adhesive label.