Flag Self-Eroding Cruising Antifouling Paint 2.5L - Red

Copper-based antifouling free from booster biocides. Designed for cruising vessels, this self-eroding coating provides dependable protection across varied UK and European waters. Its surface refreshes through mild erosion, helping to minimise coating build-up over time. Proven performance across a wide range of conditions.

Formerly known as Antifouling Cruising

Copper based antifouling free from booster biocides. This is an economical (cruising grade) self eroding antifouling with proven performance within a wide variety of UK conditions and many European locations. Proven to create less 'build up' than many traditional antifoulings. This product is self-priming when topping up existing (similar copper based) antifoulings; otherwise Antifouling Primer is required.

Suitable for general sailing and displacement craft with speeds up to around 8 knots. Also suitable for fresh water.
Area of use: Boat hulls
Substrates: GRP, wood, steel and ferro cement. Not suitable for aluminium or galvanised surfaces

Colour: Black, Dark Blue, Light Blue, Red and Grey
Finish: Matt
Volume solids: 64%
Theoretical spreading rate: 10 sq. metres per litre
Flash point: 42ºC
Specific gravity: 1.55
Dry to touch: 2 hours
Over-coating time: 6 hours
Should be launched within 2 – 3 months dependent on ambient temperature.

*The theoretical spreading rate has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.

Application Details:
Application method: Brush Conventional spray Airless spray Roller
Thinner: Antifouling Thinners
Cleaning of tools: Antifouling Thinners
Surface condition: The surface should be stable, firm, dry and free of dust,
sand, loose old paint, dirt, grease, oil and salt.