The WatchMate XB-8000 smartAIS has the ability trigger an external alarm which can be mounted anywhere on board. If the XB-8000 detects a risk situation due to a potential collision, anchor drag or a MOB activation, it alerts you with an alarm on your mobile device. It simultaneously sounds the external alarm which operates even if your mobile device is turned off.
The alarm is designed to be easily mounted and can be connected directly to the XB-8000 without the need for external relays or other components. By simply rotating the sound output vane you can control the volume level.
It is easily configured to make a steady continuous or pulsing tone like a truck back up alarm. It is heavy duty and very robust. Its terminals are via screw down or you can use 6.35mm quick disconnects.
This alarm can be used with both 12 and 24 VDC systems. It also has reverse polarity protection to prevent damage due to incorrect wiring.
Mute Switch for XB-8000
The Switch is used to mute the Alarm. Its 304 stainless steel body is durable and water-proof making it ideal for mounting both internally or externally. It is designed to be used with 12 and 24 VDC systems.
Rated voltage 12-32 VDC reverse polarity protected
Maximum voltage 32 VDC
Maximum current 35 mA
Frequency 2.9 kHz plus or minus 0.5
Configuration Makes either a steady or pulsed sound choose S or P terminal
Sound pressure 85 steady, 80 pulsed dBA/30cm
Volume adjustment Twist front vane holes to closed to reduce volume
Pulse rate 0.8 - 1.2 pulse/sec
Size Diameter: 43.5mm Height: 34.5mm
Mounting hole 29mm
Voltage Range 10-32 VDC
LED Color Blue
Button and Body 304 Stainless Steel
Contact Material Silver Alloy
Cable 150mm Tinned
Panel Thickness 1 to 10mm
Operating Temp -20C to +55C
Insulation Resistance 1000M omns
Contact Resistance 50m omns
Degree of Protection IP65