The award winning range of solar panels designed in Sweden by SUNBEAMsystem.
There are 4 ranges available, the TOUGH series have a 5 year manufacturer's warranty, the CLASSIC and Standard ranges have a 2 year manufacturer's warranty. There are models for either deck mounting or detachable versions for spray hoods and bimini use.
The type of plastic used in the standard range has UV protection will last up to 10 years and the TOUGH series has extra UV protection that lasts up to 20 years. We recommend TOUGH for use in the Caribbean and/or Mediterranean where the UV is particularly high compared to the UK and/or Northern Europe.
Controlling the power
In addition to your solar panel or panels, you will need a controller in order to manage the charging of your batteries. We recommend the intelligent control provided by an MPPT device and will guide you to the appropriate size for your system e.g. a 10amp MPPT will manage up to 130 watts of panel, 20amp for up 260 watts or the 40amp takes you up to 520 watts. These stop your battery from being overcharged and stop other charging systems from damaging your solar panels.
SUNBEAMsystem Flush panels are not only smaller but also lighter.
Clean design and a high finish. White color behind dark cells with no visible internal wires.
All panels are made to endure tough marine environments with quality down to the detail.
The preferred choice for deck fitting.
With no junction box the Flush model is the preferred choice for deck fittings.
Enabled by a flat cable with a minimal outside and maximized inside featuring 2×1.5mm2 wires. As on the other models the wires are pre tinned for the lowest resistance and longevity.
Size: 434 x 277mm
Equipped with no junction box as well as 1.5mm flat tinned cable
For permanent fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond.