A fully flexible paint formulated for renovating PVC and any other PVC variant fabric
Polymarine have formulated a specialist PVC paint called Superflex for the renovation of inflatable boats made from PVC and any other PVC variant material.
Superflex adheres in a super strong flexible bond, becoming part of the surface withstanding weathering, abrasions and retaining colours and bright whites for many years. It has a super high stretch ratio that will not crack or flake off. Superflex’s coating properties are highly opaque, easy to apply and quick drying. Application is one coat for good surface adhesion and a second coat for a smooth satin appearance and improved, lasting durability to UV and the elements.
The Unique Properties of Superflex Paint
A fully flexible paint formulated for renovating PVC and any other PVC variant fabric.
Bonds into the PVC surface for a super tough and flexible finish.
Smooth satin finish, will not crack or flake off.
No mixing required, just a vigorous shake.
Seawater and UV sunlight resistant.
Many uses including hatch covers, PVC fenders, boat covers, spray dodgers etc.
Supplied in 500ml containers.
1 x 500ml Tin is enough to apply two coats of paint on 2 to 3 square metres.
Touch-Dry in 15 minutes at 20°C.
Second Coat can be applied when Firm-Dry after a minimum 1 hour.
Hard-Dry is achieved after 24 hours or a minimum of 8 hours at 20°C.
Shake the Paint Tin vigorously prior to application. Add the approximate amount of paint you intend to use in one session to a paint kettle or similar container. Stir the container of paint every few minutes.
It is recommended that Superflex be applied using a good Brush with Natural Bristles. Synthetic Bristles may dissolve due to the solvents present within Superflex.