The ACR ResQlink PLB is innovatively designed to improve the ease of attaching the beacon to your person or gear. This PLB makes your adventures safer as well as reaching for the beacon more convenient.
The ACR ResQlink 400 has built-in buoyancy and is smaller and more lightweight that the ACR ResQlink+.
ACR ResQlink 400 Key Features:
Integrated Signal Technology
The ACR ResQlink 400 PLB has three levels of signal transmission through GPS positioning, a powerful 406MHz signal and 121.5MHz homing beacon capabilitity.
The ResQlink 400 has a built-in strobe light and infrared strobe system to facilitate rescues at night or during low visibility.
To activate, simply deploy the antenna, press the on button and the beacon will do the rest! Rescuers can be guided within 100 meters or less of your location.
The new ACR ResQlink 400 is designed with multi-function clips to be used in conjunction with the distress beacon; providing numerous wearability options for a variety of usage applications.
Batteries and Charging
This ACR PLB operates with class 2 non-hazmat lithium batteries, which must be replaced every 5 years. Once the PLB has been activated the battery will typically exceeds 24 hours transmitting a GPS signal.
Once you have activated your PLB, simply submit your story to ACR and send your used beacon back to them so they can have it mounted on their Wall of Fame and they'll send you a brand new beacon of equal or greater value. Find out more
It is necessary to self-test your ACR PLB to ensure that the beacon functions correctly. The ResQlink 400 offers two built-in test functions to allow you to routinely verify that the ACR PLB is functioning and ready for use - with the push of a button, you can easily test internal electronics and GPS tracker functionality.
Unlike most satellite enabled notification devices, the ACR ResQLink 400 PLB requires no monthly or annual subscription, making it one of the most cost effective GPS enabled emergency beacons available for long term use. In the unfortunate event of needing to use your personal locator beacon, ACR will replace it, free of charge.
Register your ResQlink+ PLB
Registering your Personal Locator Beacon is required by law in most countries. Registering is very important because should your beacon ever be activated, it is how Search and Rescue Teams will know who you are, and contacts provided may be able to supply information about your specific travel plans. In the absence of this information, it may take longer for a search-and-rescue operation to begin.
All Personal Locator Beacons sold by GTC are pre-programmed with the UK country code. Whilst they will function anywhere around the world, the first authority to be contacted in an emergency situation would be the UK Coastguard Agency in Falmouth with whom the PLB would be registered. Please contact us if you wish to have your PLB shipped with configuration for use in a country other than UK.
This ACR PLB should only be used in situations of grave and imminent danger to life. False alerts endanger lives and cause expensive disruption to Search and Rescue services. Deliberate misuse of the device could result in a penalty.
Please note that PLBs will not work underwater and should be used in a canister if you intend to carry at a depth exceeding the maximum depth stated in the technical specification.
Dimensions 11.48 x 5.16 x 3.78 cm
Battery Class 2 non-hazmat lithium batteries
Battery Typical Performance 30 Hours -20 degrees C at-4 degreesF
Battery Operational Life Exceeds required 24 Hours -20 degrees C at-4 degress F
Storage Temperature -30 degress C to +70 degrees C
Transmitter Frequency 406 MHz
Homing Beacon Frequency 121.5 MHz
Waterproof 16.40 ft 5 m at 1 hr., 33 ft 10 m at 10 min. Factory tested at 70 degrees F, exceeds RTCM waterproof requirements
No Subscription Fees
Integrated Infrared Strobe and Strobe System
Onboard 66-Channel GPS
Self-Test and GPS Test Features
Typical Performance 30 Hours
5 Year Warranty
Manufacturers Part No 2921