1. Customer Services 01394 451000
  2. Home
  3. My Basket
  4. Checkout

Blue Sea Switch Battery Mini ON/OFF With Knob 6006

Blue Sea Switch Battery Mini ON/OFF With Knob 6006
Blue Sea Switch Battery Mini ON/OFF With Knob 6006 - view 1Blue Sea Switch Battery Mini ON/OFF With Knob 6006 - view 2


Ignition protected—safe for installation aboard gasoline powered boats

Case design allows surface, front panel, or rear panel mounting

Isolating cover with snap-on sections protects rear contacts

Specifications
Switch Type Single Circuit ON-OFF
Color Red
Switch Positions 2
Battery Combine No
Alternator Field Disconnect Alternator Field Disconnect protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. if the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF. No
Maximum Voltage 48V DC
Continuous Rating The maximum current a switch is designed to conduct for an indefinite period.  300A
Intermittent Rating The maximum amount of current a switch is designed to carry for a minimum of a designated period of time. 500A (5 min)
Cranking Rating 10 sec Normally associated with 'cranking current' which is the current required by the starter circuit prior to engine starting. The cranking current varies significantly during the starting cycle. Initially, there is a large surge of current required to overcome the inertia and compression of the engine. This surge can be two to four times the average cranking current. Once the engine is turning there are peaks and valleys as the pistons go through the compression and exhaust cycles. The cranking current rating is used for sizing batteries, cables, and battery switches. 1500A
Cranking Rating 1 min The maximum amount of current a switch is designed to carry when starting an engine when the cranking period does not exceed 1 minute. 775A
Battery Inputs 1
Cable Clearance For 4/0 AWG Cables 1.12in (28.45 mm)
Cable Size to Meet Ratings 4/0 AWG (120mm²)
Mounting Holes Accept #10 Screw
Terminal Stud Size 3/8"-16 (M10)
Terminal Stud Torque 120 in-lb (13.56 Nm)
Weight 0.65lb (0.29 kg)


EAN UPC GTIN: 0632085060060



Delivery from 4.95

For this item shipped on its own
(Terms apply)




Ref: MTBSS6006

34.78
RRP 40.92



Recently Viewed