1. Customer Services 01394 451000
  2. Home
  3. My Basket
  4. Checkout

Blue Sea M Series Battery Selector Switch 6007

Blue Sea M Series Battery Selector Switch 6007
Blue Sea M Series Battery Selector Switch 6007 - view 1Blue Sea M Series Battery Selector Switch 6007 - view 2


Switches isolated battery banks to all loads or combines battery banks to all loads

Make before break contact design allows switching between battery banks without power interruption

Specifications
Switch Type Selector 4 Position
Color Red
Switch Positions 4
Battery Combine Yes
Alternator Field Disconnect Alternator Field Disconnect protects the diodes in the alternator in the event of the switch being switched to the OFF position while the engine is running. if the AFD is not used to protect the alternator, an LED can be connected to the AFD terminals to indicate when the battery switch is in any position but OFF. No
Maximum Voltage 32V DC
Continuous Rating The maximum current a switch is designed to conduct for an indefinite period.  300A
Intermittent Rating The maximum amount of current a switch is designed to carry for a minimum of a designated period of time. 500A (5 min)
Cranking Rating 10 sec Normally associated with 'cranking current' which is the current required by the starter circuit prior to engine starting. The cranking current varies significantly during the starting cycle. Initially, there is a large surge of current required to overcome the inertia and compression of the engine. This surge can be two to four times the average cranking current. Once the engine is turning there are peaks and valleys as the pistons go through the compression and exhaust cycles. The cranking current rating is used for sizing batteries, cables, and battery switches. 1500A
Cranking Rating 1 min The maximum amount of current a switch is designed to carry when starting an engine when the cranking period does not exceed 1 minute. 775A
Battery Inputs 2
Cable Clearance For 4/0 AWG Cables 1.12in (28.45 mm)
Cable Size to Meet Ratings 4/0 AWG (120mm²)
Mounting Holes Accept #10 Screw
Terminal Stud Size 3/8"-16 (M10)
Terminal Stud Torque 120 in-lb (13.56 Nm)
Weight 0.77lb (0.35 kg)


EAN UPC GTIN: 00632085060077



Delivery from 5.95

For this item shipped on its own
(Terms apply)




Ref: MTBSS6007

42.99
RRP 50.58



Recently Viewed